Honeywell Eclipse MS5100 Series - Scanner Operation; How to Use Codegate and the Manual Activation Mode; Two Modes of Operation

12
SCANNER OPERATION
How to Use CodeGate and the Manual Activation Mode
CODEGATE
®
MANUAL ACTIVATION MODE*
* This feature is not a default
setting. Refer to the MetroSelect
Configuration Guide for
instructions on enabling the
Manual Activation Mode.
Figure 11. CodeGate Enabled Figure 12. Manual Activation Mode
Two Modes of Operation
CodeGate, Out-of-Stand
• CodeGate activates when removed from the stand
• Bar code data is transmitted when the button is pressed
Manual Activation Mode*, Out-of-Stand
• Button activates laser
• Bar code data is scanned and transmitted while button is held down