To Next PageTo Next PageWhy Honeywell Eclipse MS5145 scans but the data is not correct?
If your Honeywell Barcode Reader scans but the data is not correct, the unit’s configuration might be incorrect. Make sure that the proper PC type AT, PS2 or XT is selected. Verify the correct country code and data format is selected and adjust the inter-character delay symptom.
General| Scan Pattern | Single Line |
|---|---|
| Light Source | 650 nm visible laser diode |
| Scan Speed | 72 scan lines per second |
| Interface | USB, RS232, Keyboard Wedge, IBM 46xx (RS485) |
| Weight | 100 g (3.5 oz) |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -40°C to 60°C (-40°F to 140°F) |
| Humidity | 5% to 95% relative humidity, non-condensing |
| Drop Resistance | Designed to withstand 1.5 m (5 ft) drops |
| Scan Rate | 72 scan lines per second |
| Decode Capability | 1D barcodes |
| Electrical Specifications | Input Voltage: 5 VDC ± 0.25 V |
| Regulatory Compliance | CE, FCC, RoHS |
