Need help?Do you have a question about the Honeywell Enraf 977 and is the answer not in the manual?
General| Operating Temperature | -40°C to +80°C |
|---|---|
| Process Pressure | Up to 40 bar |
| Process Connection | Flange or threaded |
| Communication Protocol | HART, Foundation Fieldbus |
| Output Signal | 4-20 mA |
| Housing Material | Aluminum or stainless steel |
| Approvals | ATEX, IECEx |
| Protection Rating | IP66/IP67 |
| Process Temperature | -40 °C to +150 °C (-40 °F to +302 °F) |
Legal considerations for instrument commissioning and troubleshooting.
Reference to the shipped EC declaration document.
Details manual content, firmware differences, and key features.
Contact details for further assistance.
Explains 977 TSI purpose, capabilities, and connections to gauges.
Describes TSI communication with level gauges and data display.
Instrument safety precautions and certifications.
Technician safety measures and required personal protective equipment.
Meaning of warnings, cautions, and notes in the manual.
Configuration of display parameters like format, millimetre selection, and zero format.
Setting and using pincodes for keyboard command access.
Procedure for adjusting display contrast via potentiometer.
How to configure the TSI communication time-out setting.
Initial display sequence, firmware version, and gauge identification.
Navigating and selecting different display formats using the keyboard.
Executing gauge commands via the Tank Side Indicator keyboard.
Lists and explains TSI error codes and their corresponding solutions.
To Next Page