Product Applications
The CDH4U5 may be used in various different applications, e.g. warehouse, school, hospital etc having a single supply or two different supplies. For more
details on the differing applications, please refer to Application Note AN4027.
Width (W) = 213 mm
Height(H) = 62 mm
Depth(D) = 91 mm
Weight = 0.55kg approx
Technical Data
Operational supply: 230VAC ~50Hz/60Hz
Power consumption: 18W maximum
Product rating & recommended circuit protection: 16A or 20A MCB
Maximum load (per channel): 6A
Digital dimming ballasts per channel: 10 maximum
Digital dimming ballasts per LCM: 40 maximum
1-10V dimming ballasts per channel: 20mA (sinking only). See manufacturer's specification: worst case 10 Ballasts but Philips HF-R, for example,
20 Ballasts.
Maintained live output: 6A
Mains supply terminal capacity: 2x2.5mm≤ or 1x4mm≤
Override switch input connector: 2.5mm≤
MLS bus connector: 2.5mm≤
MLS bus cable: 1.5mm≤ unscreened twisted pair: see Application Note AN4001
Case material: Self-extinguishing blend PC/ABS
Case finish: Gray RAL 7035
IP rating: 20
Dimensions
9 m1m
62mm
3m21 m
Volt-free
Channels
Volt-free
Channels
Dimming
Channels
Comms
Bus (MLS)
Mains
Input
Detectors
Switches
Additional
Switches
Connections
Maintained
Live VF Output
-7-
Enclosure
An enclosure (K5612S MAG) is available for this product. It provides integral connection bars fitted with link.
It features a robust base together with an all-over front cover and moulded lid in an impact-resistant, flame-retardant thermoplastic.
Cable entry points are located on top, bottom, side and rear surfaces.
Colour: Magnolia
Dimensions: 306mm x 230mm x 110mm
Protection: BS EN 60529 to IP2XC
To Next Page
Loading...
Need help?
General
