EXCEL 50 INSTALLATION INSTRUCTIONS
EN1B-0101GE51 R1105D 30
— Sending of PIN number to M20T, if it has lost it.
This guarantees that communication will re-
sume automatically after exchange of the SIM
card or after power to the M20T has been lost.
Deletion of the PIN number or resetting the controller
will stop the above mechanisms.
Verification of the PIN
You can verify the PIN without connecting a terminal program
by following these steps:
1. Connect the XI582AH MMI.
2. Enter PIN.
3. Disconnect the XI582AH MMI.
4. Connect the M20T.
5. Reconnect the XI582AH MMI.
6. View the “PIN” field.
7. If it shows “0”, the PIN was wrong.
8. If it shows “PIN”, the PIN was correct.
Additional information about the M20 terminal may be found
at the following website:
http://www.siemens.de/ic/products/cd/english/index/products/
cellular/m20t.html
To Next Page
Loading...
Need help?
General
