23
06=Card Number
Use this option to assign a card, tag or fob number to a user and reference it to the
system. Card number can contain one of the following:
the serial number from an access control card
the 10 digit number etched onto the card/fob/tag
a number generated by the RF RIO identifying an RF Keyfob button
the decrypted code of cards/tags self learned into the system for use with the
keyprox
07=MAX Function
Use this option to assign a single menu option to a card, fob, tag or button. You
must be authorized to access the menu option assigned to the MAX.
To assign a new option:
1. Do one of the following:
Press
A
or
B
until the required option is displayed.
Enter the option number directly.
2. Press
ent
to accept the selection.
08=Max Keypad
The menu option assigned to the MAX card can be limited to operate on a single
keypad. When you select this option
is displayed, indicating that a keypad has
not been specified.
To specify a keypad:
1. Press
#
. The address of the first keypad on the system is displayed.
2. Use
A
or
B
to select the required keypad, and then press
ent
.
Note: The address of the keypad that is currently being used is indicated by a
black square flashing over the first digit of the keypad address.
To Next Page
Loading...
