Need help?Do you have a question about the Honeywell Granit 1911i and is the answer not in the manual?
General| Type | Handheld bar code reader |
|---|---|
| Sensor type | - |
| Scanner type | 1D/2D |
| Pitch reading angle | 0 - 45 ° |
| Motion tolerance (cm/s) | 610 |
| Light levels (direct sunlight) | 0 - 100000 lx |
| 2D (matrix & stacked) barcodes supported | PDF417 |
| Cable length | 3 m |
| Wireless range | 100 m |
| Bluetooth version | 2.1+EDR |
| Standard interfaces | USB |
| Connectivity technology | Wireless |
| Battery life | 14 h |
| Charging time | 4.5 h |
| Input voltage | 5 V |
| Battery capacity | 2000 mAh |
| Power consumption | 1000 mA |
| Power source type | Battery |
| Number of reads per charge | 50000 |
| Power consumption (typical) | 5 W |
| Number of batteries supported | 1 |
| Product color | Grey, Red |
| Housing material | Plastic |
| Protection features | Shock resistant, Water resistant |
| International Protection (IP) code | IP65 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | -20 - 50 °C |
Weight and Dimensions| Depth | 133 mm |
|---|---|
| Width | 75 mm |
| Height | 195 mm |
| Weight | 380 g |
| Base weight | 290 g |
| Base dimensions | 103 x 250 x 65 mm |
To Next Page
