Need help?Do you have a question about the Honeywell Granit 1911i and is the answer not in the manual?
General| Type | Handheld bar code reader |
|---|---|
| Sensor type | - |
| Scanner type | 1D/2D |
| Pitch reading angle | 0 - 45 ° |
| Motion tolerance (cm/s) | 610 |
| Light levels (direct sunlight) | 0 - 100000 lx |
| 2D (matrix & stacked) barcodes supported | PDF417 |
| Cable length | 3 m |
| Wireless range | 100 m |
| Bluetooth version | 2.1+EDR |
| Standard interfaces | USB |
| Connectivity technology | Wireless |
| Battery life | 14 h |
| Charging time | 4.5 h |
| Input voltage | 5 V |
| Battery capacity | 2000 mAh |
| Power consumption | 1000 mA |
| Power source type | Battery |
| Number of reads per charge | 50000 |
| Power consumption (typical) | 5 W |
| Number of batteries supported | 1 |
| Product color | Grey, Red |
| Housing material | Plastic |
| Protection features | Shock resistant, Water resistant |
| International Protection (IP) code | IP65 |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | -20 - 50 °C |
Weight and Dimensions| Depth | 133 mm |
|---|---|
| Width | 75 mm |
| Height | 195 mm |
| Weight | 380 g |
| Base weight | 290 g |
| Base dimensions | 103 x 250 x 65 mm |
Instructions for safely opening and inspecting the scanner packaging and contents.
Guides for connecting the scanner to a computer via USB, Keyboard Wedge, RS232, or RS485 interfaces.
Explains how to use the scanner's aiming beam or pattern for effective barcode reading.
Procedure for creating and saving custom default scanner settings using menu bar codes.
Instant scanner setup for common interfaces using Plug and Play bar codes.
Details on configuring the scanner for RS232 serial port communication, including baud rate and data format.
Options for programming keyboard styles, such as Caps Lock and Shift Lock.
Step-by-step guide to establishing a wireless link between the scanner and its charge base.
Information regarding the scanner's rechargeable battery, including handling and safety.
Essential safety guidelines for handling and preventing hazards associated with lithium batteries.
Explanation of scanner and base LED indicators, beeps, and vibrations for status and errors.
Configuration of audible and visual feedback for good reads and errors.
Adjusts the volume level of the scanner's beep for successful reads.
Settings for scanner operation using manual trigger modes: Normal and Enhanced.
Defines prefixes and suffixes for adding user-defined data to scanned output.
Step-by-step guide to adding custom prefixes or suffixes to barcode data.
Procedure for creating and saving custom data formats for output.
Details on commands used within the Data Format Editor for manipulating output data.
Enables or disables all barcode symbologies for scanning.
Configures the scanner's handling of Codabar check characters.
Configures the scanner's handling of Code 39 check characters.
Configures the scanner's handling of Interleaved 2 of 5 check digits.
Command to capture an image with various modifiers for style, beeper, trigger, and LED state.
Sets the exposure time for image capture in Manual Style.
Adjusts the signal gain for image capture in Manual Style.
Detailed technical specifications for the Xenon 1900/1910 corded scanner.
Typical performance metrics for the Granit scanner, including focus and range.
Pin assignments for standard connectors used with the scanner bases.
Guidelines for cleaning the scanner's housing and window safely.
Instructions for safely replacing interface cables on corded scanners.
Steps to diagnose and resolve common issues with corded scanners.
Contact methods for installation and troubleshooting support.
Information on obtaining warranty and non-warranty service for Honeywell products.
Reference tables for symbology IDs, possible modifiers, and Honeywell Hex values.
Map of ASCII control characters and their keyboard equivalents.
To Next Page
