Need help?Do you have a question about the Honeywell 3800g and is the answer not in the manual?
General| Scan speed | 270 sec/page |
|---|---|
| Wavelength | 630 nm |
| Decoding standards | Codabar Code 3 Interleaved 2 Matrix 2 Code 11, 93, 128 UPC, EAN/JAN GS1 GTIN ISBT 128 |
| Dimensions (WxDxH) | 79 x 112 x 150 mm |
| Standard interfaces | RS-232 |
| Input voltage | 5 V |
| Power consumption | 235 mA |
| Certification | IEC60950-1, IEC60825-1 Class 1, FCC Part 15 Class B, UL, cUL, ICES-003 Class B, CE 2004/108/EC EMC, EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3. 2006/95/EC, GS, NOM-NYCE, MIC Class A, BSMI, C-Tick |
| Product color | Beige |
| Storage temperature (T-T) | -40 - 60 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
Weight and Dimensions| Weight | 158.8 g |
|---|
Instructions for connecting the imager to a computer via USB, including PC and Macintosh compatibility.
Configuring the imager for USB Keyboard (PC) or USB Keyboard (Mac) interfaces by scanning specific bar codes.
Details on connecting the imager as a keyboard wedge to a terminal or computer.
Step-by-step guide for connecting the imager using an RS-232 serial port.
Guidance on proper imager aiming and focus for effective barcode reading.
Procedure to restore the imager to its factory default settings by scanning a bar code.
Setting the correct Terminal ID for the imager to interface with specific terminals.
List of supported terminals and their corresponding Terminal IDs for imager configuration.
Configuring keyboard layout and country-specific settings for optimal imager operation.
Configuration of RS-232 baud rate, data bits, parity, and handshaking for serial communication.
Customizing beeper volume, pitch, duration, and LED indicators for good read feedback.
Configuring trigger modes (manual, automatic, presentation) and read time-out parameters.
Programming the order of scanned bar code data for specific output requirements.
Adding or clearing prefix and suffix characters for scanned data strings.
Setting delays to improve data integrity during transmission between devices.
Overview of the Data Format Editor for modifying imager output and defining custom formats.
Controlling output with programmed formats and enabling single-shot alternate format scanning.
Instructions for enabling or disabling the secondary interface for dual communication.
Enabling all symbologies or setting minimum/maximum message lengths for barcode reading.
Configuring Codabar start/stop characters, check digits, and Code 39 options like append.
Configuring Code 128 ISBT concatenation and UPC A addenda, check digits, and number system.
Configuring EAN/JAN 13 and EAN/JAN 8 check digits, addenda, and separators.
Settings for GS1 DataBar, MSI, Plessey, China Post, Korea Post, and PosiCode symbologies.
Configuration options for PDF417 and MicroPDF417 symbologies, including message length.
Mapping of keyboard function codes, hex/ASCII values, and full ASCII CTRL+ relationships.
Table detailing supported interface keys for various terminals and emulations.
Procedure to restore the imager to its factory default settings via the Utilities menu.
Step-by-step guide to download and install the Visual Xpress software from the Honeywell website.
Explains syntax, conventions, and components of serial programming commands.
Details on querying device settings and understanding command responses (ACK, ENQ, NAK).
Illustrates how to query specific settings like Codabar Coding Enable.
Procedure to reset imager to factory defaults using serial programming commands.
Technical specifications including dimensions, weight, scan rate, and voltage requirements.
Diagrams showing pinouts for Keyboard Wedge, Serial Output, and USB cables.
Guidelines for cleaning the imager and checking interface cables for wear or damage.
Step-by-step instructions for safely replacing the imager's interface cable.
Guidance on diagnosing and resolving issues like aiming beam not on or scanner not reading.
Contact information for technical support and online assistance resources.
Details on obtaining service, repair, and Return Material Authorization (RMA).
Information on Honeywell's product warranty, coverage, and limitations.
To Next Page