Honeywell 3800g - EAN;JAN 8 Check Digit; EAN;JAN 8 Addenda; EAN;JAN 8 Addenda Required

7 - 24 3800g/3800gHD/3800gPDF User’s Guide
EAN/JAN 8
EAN/JAN 8 Check Digit
This selection allows you to specify whether the check digit should be transmit-
ted at the end of the scanned data or not.
Default = On.
EAN/JAN 8 Addenda
This selection adds 2 or 5 digits to the end of all scanned EAN/JAN 8 data.
Default = Off for both 2 Digit and 5 Digit Addenda.
EAN/JAN 8 Addenda Required
When Addenda Required is set to on, the imager will only read EAN/JAN 8 bar
codes that have addenda.
Default = Not Required.
* On
Off
Off
* On
* 5 Digit Addenda Off
5 Digit Addenda On
* 2 Digit Addenda Off
2 Digit Addenda On
* Not Required
Required