Need help?Do you have a question about the Honeywell 3800G14E and is the answer not in the manual?
Instructions for connecting the imager to a computer's USB port and verifying operation.
Details on connecting the imager as a keyboard wedge to a PC or terminal.
Instructions for connecting the imager to a computer using an RS-232 serial port.
Procedure to scan a bar code to restore the imager to its standard product default settings.
Procedure for programming the imager with the correct Terminal ID for the PC interface.
Configuration of RS-232 baud rate, data bits, parity, and handshaking protocols.
Configuration of beeper, volume, pitch, duration, and LED for good read indications.
Adding, clearing, and managing prefixes and suffixes for scanned data.
Configuration for UPC A, EAN/JAN family, UPC E, EAN/JAN 8, and GS1 DataBar symbologies.
Restoring the imager to its factory default settings by scanning a bar code.
Explanation of conventions, menu command syntax, query commands, and responses.
Examples of querying device settings and activating/deactivating the imager via serial commands.
Reference tables for serial commands related to terminal interfaces and RS-232 settings.
Detailed specifications including dimensions, weight, scan rate, voltage, and temperature ranges.
Detailed specifications for HD and PDF models, including dimensions, weight, and operating conditions.
Guidance for diagnosing and resolving scanner issues like power, aiming beam, and reading problems.
Contact information for technical support by region (North America, Latin America, Europe, etc.).
Information on obtaining warranty or non-warranty service and obtaining RMA numbers.
To Next Page
General