2 - 6 3800g/3800gHD/3800gPDF User’s Guide
Emulate External Keyboard
should be scanned if you do not have an external
keyboard (IBM AT or equivalent).
Note: After scanning the Emulate External Keyboard bar code, you must power
cycle your computer.
Keyboard Modifiers
This modifies special keyboard features, such as CTRL+ ASCII codes and
Turbo Mode.
Control + ASCII Mode On:
The imager sends key combinations for ASCII
control characters for values 00-1F. Windows is the preferred mode. All key-
board country codes are supported. DOS mode is a legacy mode, and it does
not support all keyboard country codes. New users should use the Windows
mode. Refer to Keyboard Function Relationships, page 8-1 for CTRL+ ASCII
Values.
Default = Off
Turbo Mode:
The imager sends characters to a terminal faster. If the terminal
drops characters, do not use Turbo Mode.
Default = Off
Emulate External Keyboard
Windows Mode Control + ASCII
Mode On
* Control + ASCII Mode Off
DOS Mode Control + ASCII
Mode On
Turbo Mode On
* Turbo Mode Off
To Next Page
Loading...
