Need help?Do you have a question about the Honeywell 8675i and is the answer not in the manual?
General| Type | Fixed bar code reader |
|---|---|
| Sensor type | - |
| Scanner type | 1D/2D |
| Bluetooth version | 5.1 |
| Standard interfaces | Bluetooth |
| Connectivity technology | Wireless |
| Product color | Black, Grey |
| LED indicators | Battery level, Battery replacement, Bluetooth |
| International Protection (IP) code | IP65 |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | -20 - 50 °C |
| Battery type | Built-in battery |
| Power source type | Battery |
| Battery technology | Lithium |
Weight and Dimensions| Depth | 30.3 mm |
|---|---|
| Width | 65.2 mm |
| Height | 15.2 mm |
| Weight | 66 g |
Read all labels and documentation before using or replacing the battery.
Use Honeywell accessories and power adapters to avoid damage not covered by warranty.
Ensure all components are dry before connecting to prevent damage.
Use only Honeywell battery model BAT-SCN10 for installation.
Squeeze latches, lift battery, align new battery, and snap into place.
Press the scan trigger to power up the device.
Warning: Do not stare directly into the laser beam.
Center aiming pattern over barcode for good read; any direction is acceptable.
Pair device with PC/laptop for continuous connection attempts.
Pair device with PC/laptop using HID keyboard emulation.
Scan barcode to unlink device from current host connection.
Pair Android phone by touching devices; ensure NFC is ON.
Pair with Android, Apple, Windows mobile devices via Bluetooth HID Keyboard.
Pair device with Honeywell vehicle mount or mobile computers.
Pair device with Vocollect device using Bluetooth Serial Port Profile.
Scan barcode to restore device to factory default settings.
Information on limited warranty, patents, and disclaimers.
To Next Page