3
Charging the Battery
The 8675i rugged compact wearable scanner ships with a
partially charged battery. The battery must be fully charged
before first use. The following charging stations are available for
the device and must be purchased separately:
• MB8-BAT-SCN10
• MB24-BAT-SCN10
•MB4-SCN10
• MB12-SCN10
•MB1-SCN10
We recommend the use of Honeywell accessories
and power adapters. Use of non-Honeywell
accessories or power adapters may cause damage
not covered by the warranty.
Ensure all components are dry prior to mating the
computers and batteries with peripheral devices.
Mating wet components may cause damage not
covered by the warranty.
To Next Page
Loading...
