15
each Vocollect device. The EZPairing barcode begins with
{FNC3} LnkB, followed by 12 digits, like the sample below.
5. The Bluetooth LED flashes continuously when the 8675i
pairs with a host. Once the 8675i battery is charged and you
have paired it to a host device, you may begin scanning
barcodes.
Reset Custom Defaults
If you want the custom default settings restored to your 8675i,
scan the Activate Custom Defaults barcode below. This is the
recommended default barcode for most users. It resets the
8675i to the custom default settings. If there are no custom
defaults, it resets the 8675i to the factory default settings. Any
settings that have not been specified through the custom
defaults are defaulted to the factory default settings.
Note: Scanning the Defaults barcode also causes both the 8675i
and the host to perform a reset and become unlinked. You
must relink (pair) the 8675i to the host.
To Next Page
Loading...
