14
Pair with a Vocollect Device
In this mode, the scanner will continually attempt to connect
with the host. If the scanner and the host become disconnected,
the scanner will manage the reconnection.
1. Scan the Bluetooth Serial Port Profile Connect barcode
below.
2. Configure the 8675i with the termination characters used
for your workflow. This is often a carriage return and line
feed, which can be programmed by scanning the following
barcode:
Refer to the 8675i User Guide if you require other
termination characters.
3. In the VoiceConsole, set the Vocollect device to:
•Pairing type Bluetooth Scanner
• Connection mode Device listens for peripheral connection
•Security type Disabled
4. Simple scan-based pairing can be accomplished by
creating a dedicated pairing barcode and applying it to
Bluetooth Serial Port Profile Connect
To Next Page
Loading...
