Honeywell 3800G14E - Symbology Configuration Commands

3800g/3800gHD/3800gPDF User’s Guide 11 - 11
Symbologies
All Symbologies All Symbologies Off ALLENA0 7-2
All Symbologies On ALLENA1 7-2
Codabar Default All Codabar
Settings
CBRDFT 7-3
Codabar Off CBRENA0 7-3
*On CBRENA1 7-3
Codabar Start/Stop
Char.
*Don’t Transmit CBRSSX0 7-3
Transmit CBRSSX1 7-3
Codabar Check Char. *No Check Char. CBRCK20 7-4
Validate, But Don’t Trans-
mit
CBRCK21 7-4
Validate, and Transmit CBRCK22 7-4
Codabar Concatena-
tion
*Off CBRCCT0 7-4
On CBRCCT1 7-4
Require CBRCCT2 7-4
Codabar Message
Length
Minimum (2 - 60) *4 CBRMIN## 7-5
Maximum (2 - 60) *60 CBRMAX## 7-5
Code 39 Default All Code 39
Settings
C39DFT 7-5
Code 39 Off C39ENA0 7-5
*On C39ENA1 7-5
Code 39 Start/Stop
Char.
*Don’t Transmit C39SSX0 7-5
Transmit C39SSX1 7-5
Code 39 Check Char. *No Check Char. C39CK20 7-6
Validate, But Don’t
Transmit
C39CK21 7-6
Validate,
and Transmit
C39CK22 7-6
Code 39 Message
Length
Minimum (0 - 48) *0 C39MIN## 7-6
Maximum (0 - 48) *48 C39MAX## 7-6
Selection
Setting
* Indicates default
Serial
Command
# Indicates a
numeric entry
Page