EasyManua.ls Logo

Honeywell Granit 1920i User Manual

Honeywell Granit 1920i
376 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User Guide
Xenon™/Granit™
Xenon 1900, 1900h, 1902, 1902h, 1902g-BF
Granit 1910i, 1911i, 1980i, 1981i, 1920i
Area-Imaging Scanners

Table of Contents

Other manuals for Honeywell Granit 1920i

Question and Answer IconNeed help?

Do you have a question about the Honeywell Granit 1920i and is the answer not in the manual?

Honeywell Granit 1920i Specifications

General IconGeneral
Input voltage4 - 5.5 V
Power consumption (standby)0.5 W
Power consumption (typical)2.35 W
Standard interfacesUSB, RS-232, RS-485, Keyboard wedge
Connectivity technologyWired
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)-30 - 50 °C
Operating relative humidity (H-H)0 - 95 %
Product colorGrey, Red
LED indicatorsYes
Housing material-
International Protection (IP) codeIP65
TypeHandheld bar code reader
Scanner type1D
Yaw reading angle-65 - 65 °
Tilt reading angle32.2 - 41.4 °
Pitch reading angle-45 - 45 °
Light levels (direct sunlight)0 - 100000 lx
Linear (1D) barcodes supportedPDF417
Cables includedUSB
Harmonized System (HS) code84716070
Weight and Dimensions IconWeight and Dimensions
Depth134 mm
Width74.5 mm
Height193 mm
Weight312 g

Summary

Chapter 1 - Get Started

Chapter 2 - Program the Interface

Keyboard Wedge

Configuration for IBM PC AT and compatible keyboard wedge interface with a USA keyboard.

RS232 Serial Port

Configuration for connecting via serial port, including baud rate and data format settings.

Chapter 3 - Cordless System Operation: Xenon 1902g/1912 and Granit 1911i/1981i

Link the Scanner to a Charge Base

Steps to establish a link between a scanner and its cordless charge base.

Link the Scanner to an Access Point

Procedure for connecting a scanner to an Access Point for wireless communication.

Chapter 5 - Input/Output Settings

Chapter 8 - Data Edit

Add a Prefix or Suffix

Step-by-step guide to adding custom prefixes or suffixes to scanned data.

Chapter 9 - Data Format

Add a Data Format

Steps to create custom data formats, including terminal type and code ID.

Chapter 10 - Symbologies

Chapter 11 - Imaging Commands

Image Snap - IMGSNP

Captures an image when the trigger is pressed or command processed, with various modifiers.

Chapter 13 - Serial Programming Commands

Chapter 14 - Product Specifications

Xenon 1900/1900h Corded Scanner Product Specifications

Detailed mechanical, electrical, environmental, and performance specifications for corded scanners.

Xenon 1902/1902h/1912 Cordless Scanner Product Specifications

Technical specifications for cordless Xenon scanners, including battery and radio details.

Xenon 1902g-BF Scanner Product Specifications

Technical specifications for the Xenon 1902g-BF scanner, covering mechanical, electrical, and radio.

Chapter 15 - Maintenance and Troubleshooting

Clean the Scanner

Instructions for cleaning the scanner and base housing with a soft cloth or mild solution.

Clean the Window

Guidance on cleaning the scanner window to maintain optimal reading performance.

Related product manuals