262 Xenon/Granit User Guide
Show Software Revision
Scan the bar code below to output the current software revision, unit serial number,
and other product information for both the scanner and base.
Test Menu
When you scan the Test Menu On code, then scan a programming code in this
manual, the scanner displays the content of a programming code. The program-
ming function will still occur, but in addition, the content of that programming
code is output to the terminal.
Note: This feature should not be used during normal scanner operation.
TotalFreedom
TotalFreedom is an open system architecture that makes it possible for you create
applications that reside on your scanner. Decoding apps and Data Formatting
apps can be created using TotalFreedom. For further information about TotalFree-
dom, go to our website at www.honeywellaidc.com.
To Next Page
Loading...
