Honeywell HCC80R - Table of Contents

Introduction 2
System overview 3
Function overview 5
Mounting and installation 6
Creating a zoning plan 6
Zoning plan (sample) 7
Safety instructions 8
Installing the underfloor heating controller 9
Settings at the underfloor heating controller 10
Cabling 11
Commissioning 13
Connecting devices (binding) 14
Binding room setpoint generators/sensors
with the evohomecontroller 14
Binding the room device CM927 with the
underfloor heating controller 16
Binding the underfloor heating controller
without time program 17
Cancelling the assignment of zones (rooms) 20
Checking the installation 21
Help with problems 22
Changing the fuse 22
Restoring the factory settings at the
underfloor heating controller 22
Fault displays 22
Errors and elimination 23
Options 24
Boiler feedback 24
Allocating relay modules for controlling
the heat generator 24
Cooling with CM927 25
Time program for cooling function 26
Appendix 27
Navigation and function overview 27
Technical data 28
Declaration of conformity 28
Device and function definition in accordance
with EN60730-1 28
WEEE directive 2012/19/EC 28
HCE80(R) / HCC80(R) Mounting and operation
1
Contents