Performance Series IP Camera Software Configuration Guide
22
5 Configuring Camera Settings
This chapter contains the following sections:
• Configuring Camera Settings, page 22
• Configuring Network Settings, page 31
• Configuring Storage Settings, page 43
• Configuring System Settings, page 47
• Viewing System Information, page 53
Configuring Camera Settings
Conditions
On the Conditions tab, you can view camera property information. The configurations become valid
immediately after they are saved.
Note
The settings that are available on the Conditions tab may differ depending
on the selections made in the Profile Management setup (see Profile
Management on page 25 for more information).
Figure 5-1 Camera Setup Window
To Next Page
Loading...
Need help?
General