Need help?Do you have a question about the Honeywell HPF-PS10 and is the answer not in the manual?
General| Input Voltage | 100-240 VAC |
|---|---|
| Input Frequency | 50/60 Hz |
| Output Voltage | 24 VDC |
| Protection | Overload, Overvoltage, Short Circuit |
| Operating Temperature | -10°C to +60°C |
| Storage Temperature | +85 °C |
Lists the key features and capabilities of the HPF-PS power supply unit.
Details the technical specifications of the HPF-PS series power supplies.
Outlines the step-by-step procedure for starting up and configuring the power supply.
Details the wiring requirements for Notification Appliance Circuits (NACs), including Class B and Class A options.
Details the global configuration options controlled by DIP switch S1.
Explains how DIP switches S2-S8 control individual output circuit functions.
Explains how input circuits are used for trouble supervision in Default and Retrofit modes.
Describes the function and monitoring of the General Trouble relay.
Details the AC Trouble relay's response to AC fail conditions and its supervision.
Provides steps to calculate secondary alarm and non-alarm current draws.
Explains how to select and locate appropriate batteries based on system load requirements.
To Next Page