Honeywell HPF24S6 User Manual

INSTALLATION MANUAL
HPF24S6 & HPF24S8, HPF24S6E &
HPF24S8E, HPF24S6C & HPF24S8C
FIELD CHARGER/POWER SUPPLY
P/N 52751:E1 • ECN 11-237 • 4/14/2011

Honeywell HPF24S6 Specifications

General

Input Voltage	100-240 VAC
Output Voltage	24 VDC
Output Current	6.25 A
Power	150 W
Frequency	50/60 Hz
Protection	Overload, Overvoltage, Short Circuit

Summary

System Overview

General System Overview

Start-up Procedure

Step-by-step instructions for powering up the system.

Jumpers Configuration

Specifications

HPF24S Board Layout

Installation Guide

Backbox Mounting

Instructions for mounting the backbox for the power supply.

NAC Circuit Wiring

Wiring instructions for Notification Appliance Circuits.

Addressable Module Mounting

NEC Power-limited Wiring Requirements

Guidelines for power-limited wiring according to NEC standards.

Programming Options

Field Programming DIP Switches

Illustration and explanation of the DIP switches for programming.

Synchronization Type Selection

How to select the strobe synchronization type using DIP switches.

Synchronization Mode - Master/Slave

Configuration for Master or Slave synchronization modes.

Input/Output Function

How to configure input and output functions using DIP switches.

Trouble Supervision

Supervision of FACP to HPF24S wiring

How the FACP supervises the wiring to the HPF24S.

Supervision of HPF24S Faults

How the FACP detects internal HPF24S faults.

Aux. Trouble Relay/AC Fail Relay

AC Loss Reporting Delay

Applications

Controlling Four NACs With One Input and Selective Silence

Application for controlling four NACs with selective silence.

Controlling Three NACs and One Door Holder With One Input

Split Temporal Mode of Operation

Remote Supply With Resettable and Nonresettable Power

Master FACP with Slave HPF24S Power Supply

Power Supply Requirements

Calculating the AC Branch Circuit

Calculating the System Current Draw

Calculating the Battery Size