Need help?Do you have a question about the Honeywell HPF-PS6 and is the answer not in the manual?
General| Input Voltage | 100-240 VAC |
|---|---|
| Input Frequency | 50/60 Hz |
| Output Voltage | 24 VDC |
| Protection | Overload, Overvoltage, Short Circuit |
| Number of Outputs | 1 |
Provides a general overview of the HPF-PS power supply features and capabilities.
Details the key features and functionalities offered by the HPF-PS power supply.
Outlines the technical specifications of the HPF-PS power supply, including voltage and current ratings.
Details the procedure and dimensions for mounting the HPF-PS backbox.
Details the global control options configurable via the S1 DIP switch.
Describes the status and fault indications for the Ground Fault LED.
Explains the status and fault indications for the Power LED.
Details the status and fault indications for the Battery Fault LED.
Explains how input circuits are used for supervising power supply troubles.
Introduces the section on calculating power supply requirements and battery sizing.
Guides on calculating the required AC branch circuit current for the system.
Provides methods for calculating system current draw under various conditions.
Outlines the importance and procedures for periodic testing and servicing of the equipment.
Provides guidance on checking and maintaining the system's batteries.
Demonstrates controlling NACs for selective silence using a control module.
To Next Page