Rev 3.01 5 Document 900.0399
08/08
2
DVR Unit Installation
This chapter explains how to:
• Set the DVR for NTSC or PAL
• Connect the DVR to peripheral equipment
Before You Begin
Unpack Everything
Check that the items received match those listed on the order form and packing slip. The
HRDE4x4 packing box should include:
• One fully-assembled HRDE4x4 DVR
• One power cable
• One 12 VDC switching adapter
• One Remote Access Software CD
• This User’s Guide and Quick Start Guides
If any parts are missing or damaged, contact the dealer you purchased the DVR from or call
Honeywell Customer Service (see the back cover of this document for contact information).
Please read this document carefully before
you install your DVR.
Keep this guide for future reference.
To Next Page
Loading...
