Rev 3.01 20 Document 900.0399
08/08
specific camera ID, select the camera ID using the LEFT and RIGHT arrow controls. The
following options are available on the PTZ CONTROL screen:
• CAMERA SPEED (19200, 14400, 9600, 4800, 2400)
• CAMERA NUMBER (channel number that the PTZ is connected to)
• CAMERA TYPE (protocol type)
• CAMERA ID (0–63)
Figure 3-9 PTZ Control Setup Screen
Table 3-7 Compatible PTZ Protocols
Setting Network Parameters
Set up your network parameters (for remote connection through the Remote Access
Software) on the Network Setup screen. See Chapter 5, RAS Installation, Chapter 6, RAS
Operation, and Chapter 7, RAS Configuration for more information about RAS.
SAMSUNG MPT-230 SONY EVI-D30 DYNACOLOR DSCP
WON WOO DONGYANG DSC-230S DONGYANG DSC-230M
DONGYANG DPC-100 DONGYANG DSC-240 DONGYANG DRX-500
DONGYANG DRX-502A PELCO D-PROTOCOL PELCO P-PROTOCOL
PELCO CM6700 COSTAR 2500 VICON V2311RB3
VICON VPS1300 VICON 422R CNB PTZ 102N
KALATEL KTD-312 SENSOMATIC PTZ ELMO PTC-200
CANNON VC-C4 HITRON SCANDOMEII WOOJU (DRX-502A)
SAMSUNG MRX-1000 KCC-PT400 VIDO B-01
LG LPT-A100L TSC PIH-302
DS-120 SCC-641 WV-CS850
VC-C50i NIKO NK-97 NEWBORN DOME
SJ-100 DY-255 HRX-700
VCL KD6i BOSCH
HONEYWELL SCANDOMEII
To Next Page
Loading...
