Honeywell HRDE4X4 - Appendix E Specifications; Technical Specifications

Rev 3.01 65 Document 900.0399
08/08
E
Specifications
Table E-1 Technical Specifications
Video
Signal Format: NTSC or PAL
Video Input: Composite: 4-channel, 1.0 V P-P, 75 Ω, BNC
Monitor Outputs: Composite: 1-channel, 1.0 V P-P, 75 Ω, BNC
VGA: 1-channel
Video Resolution: NTSC: Quad 360 x 240, Full screen 720 x 480
PAL: Quad 360 x 288, Full screen 720 x 576
Compression Algorithm: MPEG-4
Playback/Record Speed
(frames per second):
NTSC: Quad 120 IPS, Full screen 30 IPS/4-ch
PAL: Quad 100 IPS, Full screen 25 IPS/4-ch
Still Image Capture: NTSC: Quad 360 x 240, Full screen 720 x 480
PAL: Quad 360 x 288, Full screen 720 x 576
Inputs, Outputs
Sensor Input: 4 Sensor In (N/O, N/C selectable)
Sensor Output: 1 Internal Relay, Rated Load 0.5 A @ 30 VAC or
1 A @ 30 VDC
Network Connectivity: ADSL, LAN / Dynamic IP Support
1 10/100-base T Ethernet
Audio Input: 4 Lines In, Line level input (RCA)
Audio Output: 1 Line Out (RCA)
Connectors
Video Input: Composite: 4-channel BNC
Monitor Output: Composite: 1-channel BNC
VGA: 1-channel
Audio In: RCA
Audio Out: RCA
Ethernet Port: RJ-485, 10/100 Base
RS-232-C Serial Port: 9-pin D type (Engineering use only)