Rev 3.01 33 Document 900.0399
08/08
Network Mode
The DVR provides a live remote monitoring feature. Remote monitoring requires installation
of a Remote Access Software program on your PC (see Chapter 5, RAS Installation). A LAN
connection using the RJ45 connector on the DVR rear panel is mandatory for remote
connection. For detailed descriptions on operation of the RAS program, please refer to
Chapter 6, RAS Operation and Chapter 7, RAS Configuration.
For local operating purposes, the frame rate is limited to 1 frame/sec when the DVR is not
recording. When the DVR is recording, the video frame rate for live monitoring is the same
as the recording frame rate.
Figure 4-13 Main GUI Screen of RAS Program
Archiving Video
To archive a still image or video clip to a USB memory stick, the user must first find a still
image or video clip to archive.
Switch the live view between quad display and full screen display mode
of the highlighted channel.
ARCH Press to launch the archiving function.
Table 4-3 Button Functions in Play Mode (Cont’d)
Button Description
To Next Page
Loading...
