Rev 3.01 12 Document 900.0399
08/08
USB Port
There is a USB port on the left side of the front panel. You can use this port to save video
clips or stills onto a USB stick (see Archiving Video, page 33) and to upgrade the DVR
firmware.
Table 3-2 Front Panel Controls
Control Function
SEQ Start auto sequencing only in full screen mode. Toggles on and off.
SEARCH Opens search menu.
REC Starts/stops manual recording (requires password entry).
ARCH Starts archiving a video clip or still image to a USB stick.
PTZ Controls Pan/Tilt/Zoom (PTZ) operation.
SETUP Opens the Setup menu.
ESC • Temporarily stores the changed value
• Returns to the previous menu screen
• Rewinds the video in Playback mode. Press again to toggle the
playback speed at 1x, 2x, 4x, 8x, and 16x speeds.
• See Log List Search on page 30.
Jump/step backward. In Playback mode, the playback position
moves one minute backward.
Play or pause a video clip in Playback mode.
Jump/step forward. In Playback mode, the playback position
moves one minute forward.
• Plays the video forward in Playback mode. Press again to
toggle the speed to 1x, 2x, 4x, 8x, and 16x normal speed.
• See the Archive Search on page 31.
•Moves UP in the menu structure in Setup mode
• Selects camera 1 in Live and Playback modes
• Used as the number 1 when entering the password
•Moves RIGHT in the menu structure in Setup mode
• Selects camera 2 in Live and Playback modes
• Used as the number 2 when entering the password
•Moves DOWN in the menu structure in Setup mode
• Selects camera 3 in Live and Playback modes
• Used as the number 3 when entering the password
•Moves LEFT in the menu structure in Setup mode
• Selects camera 4 in Live and Playback modes
• Used as the number 4 when entering the password
• Selects full screen or quad view in Live and Playback modes
• Selects desired menu item
• Stores setup value in the menu
1
2
3
4
To Next Page
Loading...
