www.honeywell.com/security
116 | HRGX DVR User Manual
•For SAN, click Search to display a list of available SAN disks on the network, and then
select a disk from the list. The directory of the selected disk populates the NetHDD
Directory field.
7. Click OK to add the disk as the selected network HDD. The newly added network HDD is
displayed in the lists of HDDs on the General page.
8. If the status of the newly added network HDD shows as Uninitialized, select the HDD, and
then click Init to initialize the HDD. The HDD must be initialized before it can be used.
To delete a network HDD:
•In Menu > HDD > General, select the HDD you want to delete from the list of HDDs, and
then click the Delete button .
To Next Page
Loading...
