EasyManuals Logo

Honeywell HW4CEDVWW0 User Manual

Honeywell HW4CEDVWW0
79 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
11
USE & OPERATION (CONTINUED)
EN
FUNCTION BUTTONS (CONTINUED)
AUTO TURN OFF:
While unit is running, press the first and then the display will flash. While the display is flashing,
press the + or - button to select the number of hours after which you want the unit to turn OFF
automatically.
AUTO TURN ON:
When the unit is in standby mode, press the button first and then press the + or - button to
select the number of hours until you want the unit to automatically start running.
Note: The time is adjustable between 1 - 24 hours.
TIMER CONTROL
After switching the air conditioner off, you must wait 3 minutes before switching it back on again.
WATER FULL LIGHT
Condensate may accumulate in the unit. If the internal tank becomes full, the Water Full Light
will flash and beep 10 times. The unit will not operate until the tank has been drained (refer to the
Water Condensate Drainage section)
WIFI MODE^
When the Smart Portable Air Conditioner is connected to the wifi function, the indicator light will
be illuminated.
^THIS IS ONLY FOR MODEL HW4CEDVWW0

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell HW4CEDVWW0 and is the answer not in the manual?

Honeywell HW4CEDVWW0 Specifications

General IconGeneral
BrandHoneywell
ModelHW4CEDVWW0
CategoryAir Conditioner
LanguageEnglish

Related product manuals