44 ซ.บรมราชชนนี 70 ถ.บรมราชชนนี ศาลาธรรมสพน์ ทวีวัฒนา กทม. 10170.
website: https://www.add-furnace.com/ โทร: 02-888-3472
Line ID: @add11 e-mail: add028883472@gmail.com
9
.
2
I
n
s
t
a
ll
a
t
io
n
The unit can be installed in any
position. The installation position
should however be selected care-
fully in order to ensure that the dis-
play can easily be read.
The housing is made of impact-
resistant plastic. The upper section
containing the detection circuitry is
a push connection fit into the lower
section. The connection terminals,
grounding strip and neutral bus are
located in the lower section. The
upper section of the housing is at-
tached to the lower section using
two screws.
The lower section can either be
snapped onto a DIN rail or secured
with two M5 screws. In order to
obtain enclosure IP 54, two sealing
washers must be placed beneath
the M5 screws.
The housing has 6 knock-out holes
for M16 plastic cable glands.
.
To Next Page
Loading...
