Honeywell LYNX User Manual

– 19 –
SECURING THE PREMISES
SECURING THE PREMISESSECURING THE PREMISES
SECURING THE PREMISES
Arming the System
Armed: Stay
More
10:18 AM June 8, 2010
5000-100-056-V0
Zones
Message
System
Disarm
Phone
3. At the end of the exit delay the system
will announce
“Armed Stay” and
display the “Armed Stay” screen.
If an invalid User Code is entered, the system will return to the home screen.
Auto Stay Feature
If this feature is enabled by installer, the LYNX Touch SIA, when armed AWAY from the control’s
keypad or a Wireless Keypad, switches to the STAY mode if the Exit Time expires and no exit has been
made.
NOTE: If the exit route entry/exit sensor is in a check condition or has been bypassed it will result in a loss of interior
protection because the alarm system will arm STAY in this case. Consult with your installer for servicing of the
entry exit zones or to turn off this feature if a check condition on entry exit zones occurs.

Honeywell LYNX Specifications

General

Voice Control	No
Type	Wireless Security System
Voice Prompts	Yes
Display	Color touchscreen
Communication	Cellular
Automation	Z-Wave
Battery Backup	Yes
Series	LYNX Touch
Compatibility	Honeywell Total Connect
Power Supply	Plug-in transformer
Keypad	Integrated touchscreen
Remote Control	Via Honeywell Total Connect app