– 45 –
USER FUNCTIONS
USER FUNCTIONSUSER FUNCTIONS
USER FUNCTIONS
Programming Devices
General Information
The Device programming option can be used to trigger device, send Follow-Me or E-mail
messages of system events. Up to 16 devices can be programmed. Devices 1 through 8 are
used for Triggers and Follow-Me Messages and Devices 9 through 16 are used for E-mail
events. Check with your Installer to see which options are available to you.
The following options are programmed in this section:
Programming Field Action
Device 1 -16: Select Device 1 -16
Name: Name the device
Action: Select the action required for the device
Start Zone Type: Select Zone Type to trigger event
Stop Zone Type: Select Zone Type to stop event
Start System Operation: Select System Operation to trigger event
Stop System Operation: Select System Operation to stop event
Zone Number Operation: Select Zone Number to trigger event upon fault, trouble or alarm
as selected.
Programming Devices
Arm Away
Ready To Arm
Arm Stay
BackDelay
Settings
10:18 AM June 8, 2010
5000-100-007-V0
Tools
1. With the system in the disarmed state, select
the “Tools” icon from the second page of the
Home Screen. The system displays the Keypad
screen.
Ready To Arm
Program the system
Enter Code:
Cancel
5000-100-009-V0
231
5
64
0
8
97
Clear
2. Enter your 4-digit Master User Code. The
system displays the Master User programming
screen.
To Next Page
Loading...
Need help?
General
