– 39 –
USER FUNCTIONS
USER FUNCTIONSUSER FUNCTIONS
USER FUNCTIONS
Message Recording and Playback
The LYNX Touch Message Center allows you to record, play and delete messages. The
maximum message duration is 180 seconds.
NOTES: (1) If the system loses electrical power, all messages will be erased.
(2) Message Play/Record will not be available if a report must be sent.
Entering message mode
Zones
Arm Away
Ready To Arm
Arm Stay
MoreDelay
Phone
10:18 AM June 8, 2010
5000-100-006-V0
Message
System
1. With the system in the disarmed state,
select the “Message” icon from the Home
Screen. The system displays the Message
screen.
Recording a message
Ready To Arm
Save
5000-100-045-V0
Add New
Delete All
Play
1. Select “Add New”. The system displays the
Record Message screen.
Ready To Arm
5000-100-047-V0
Message 2 Stopped
Record DeletePlay
2. Select “Record”, the system will sound a
single tone. Speak into the microphone and
record your message.
3. When you are finished recording your
message, select. “Stop”
4. To listen to the message, select “Play”.
5. If you wish to delete the message, select
“Delete”.
To Next Page
Loading...
Need help?
General
