Honeywell Lyric LCP500-LC - Installing the Lyric Controller: Communication Modules; Communication Module Installation Steps

Lyric Controller Installation and Reference Guide
- 11 -
Installing
InstallingInstalling
Installing the Control (Continued)
the Control (Continued)the Control (Continued)
the Control (Continued)
!
The
The The
The LYRIC
LYRICLYRIC
LYRIC-
--
-CDMA
CDMACDMA
CDMA Communications Module is only available in the continental United States,
Communications Module is only available in the continental United States, Communications Module is only available in the continental United States,
Communications Module is only available in the continental United States,
Alaska
Alaska Alaska
Alaska and Hawaii
and Hawaiiand Hawaii
and Hawaii.
..
.
Communication Modules
Communication ModulesCommunication Modules
Communication Modules
The Lyric Controller supports Central Station reporting using wireless/cellular and Wi-Fi communications
devices. They also support upload/download programming capability via the Internet. This allows site
maintenance independent of Central Station monitoring, and modification to sites globally via the Internet. Refer
to the Programming Guide (p/n 800-18077) for information regarding programming and registration.
Additionally, an internal Z-Wave module allows the Lyric Controller to support Home Automation functions.
(refer to the Lyric User Guide (p/n 800-16078 for additional information.) The controllers are compatible with
the following AlarmNet Communication Modules:
Model
ModelModel
Model
Description
DescriptionDescription
Description
LYRIC
-
3G
GSM Cellular Communications Module
L
YRIC
-
3G
C (Canada)
GSM Cellular Communi
cations Module
LYRIC
-
CDMA
CDMA Cellular Communications Module
LYRIC
-
LTE
(Series)
LTE Cellular
Communications Module
Communic
CommunicCommunic
Communications Module
ations Moduleations Module
ations Module 24
2424
24-
--
-Hour Standby Power
Hour Standby PowerHour Standby Power
Hour Standby Power
If 24-hour standby is required, the Super High Capacity battery (p/n 300-03866-AIO) must be installed.
!
RF E
RF ERF E
RF Exposure
xposurexposure
xposure
WARNING: The
WARNING: The WARNING: The
WARNING: The
Lyric
Lyric Lyric
Lyric Controller
ControllerController
Controller must be installed to provide a separation distance of at least 7.8
must be installed to provide a separation distance of at least 7.8 must be installed to provide a separation distance of at least 7.8
must be installed to provide a separation distance of at least 7.8
in (20 cm) from all persons and not co
in (20 cm) from all persons and not coin (20 cm) from all persons and not co
in (20 cm) from all persons and not co
-
--
-located or operated in conjunction with any other
located or operated in conjunction with any other located or operated in conjunction with any other
located or operated in conjunction with any other
transmitter except in accordance with FCC multi
transmitter except in accordance with FCC multitransmitter except in accordance with FCC multi
transmitter except in accordance with FCC multi
-
--
-transmitter pr
transmitter prtransmitter pr
transmitter product procedures.
oduct procedures.oduct procedures.
oduct procedures.
Insta
InstaInsta
Install
llll
ll and Confi
and Confiand Confi
and Configur
gurgur
gure
ee
e C
CC
Communication
ommunication ommunication
ommunication Module
ModuleModule
Module
Follow the steps and refer to the figure below to install the Communications Module.
Installing the
Installing the Installing the
Installing the Cellular
Cellular Cellular
Cellular Communications Module
Communications ModuleCommunications Module
Communications Module
1. At the Installer Programming Tools Menu screen select “Test” OR at the Master User Tools Menu
Programming screen select “Advanced”.
2. Select “Install Cellular Module” and follow the prompts displayed on the controller or follow the steps below.
3. Remove controller side cover (bezel).
4. Remove the screw securing the module to the controller (if installed).
5. Remove the existing Cellular Communications Module (if installed).
6. Install the Cellular Communications Module into the controller.
7. Ensure that the Communications Module is properly seated into the controller.
8. Insert the side cover (bezel) into the controller.
9. Slide the side cover (bezel) down to lock it in place and secure the Communications Module.
10. Select OK to complete the installation.
N
NN
NOTE
OTEOTE
OTE:
::
: The Communication Path will be dynamically adjusted when a Cellular Communication Module is
installed or removed.
11. Enable the Communications Module, configure alarm reporting and module supervision and register the
device. Refer to the “Program Communicator” and “Communications Diagnostics” sections in the
Programming Guide (p/n 800-18077). OR Log on to the AlarmNet 360 website (http://alarmnet360.com).
The
The The
The
Communications Module
Communications ModuleCommunications Module
Communications Module must be registered
must be registered must be registered
must be registered with
with with
with AlarmNet 360
AlarmNet 360AlarmNet 360
AlarmNet 360 before downloading o
before downloading obefore downloading o
before downloading or
r r
r
alarm reporting can take place.
alarm reporting can take place.alarm reporting can take place.
alarm reporting can take place.