Honeywell Lyric LCP500-LC - System Programming Mechanics; Navigating the Touchscreen Interface and Menus

Lyric Controller Installation and Reference Guide
- 15 -
Mechanics of Programming
Mechanics of ProgrammingMechanics of Programming
Mechanics of Programming
Navigating Menus
Navigating MenusNavigating Menus
Navigating Menus
Touch
TouchTouch
Touch-
--
-screen
screenscreen
screen Display
DisplayDisplay
Display
The LYRIC Controller’s Liquid Crystal Display (LCD) touch-screen displays variable icons and text on “screens”.
The screen displays status icons and associated text, the current time and date, system status information and
menu choices. The Menu area includes a list of commands, or choices that apply to the current selection. The
status area provides information about various system events and a colored bar also provides an indication of
system status. A “Home Screen” is displayed whenever power is applied to the system. In addition, the Home
Function key is lit Green when the system is ready or flashes when it is not. When the system is armed the Home
Function key is lit Red.
lyric-009-V2
Ready To Arm - Chime
Notices
Automation
Settings
Video
Smart Scenes
66F
Mostly Sunny
5-Day Forecast
December 31, 2014
Security
12:00PM
LYRIC
LYRICLYRIC
LYRIC
®
®®
®
Controller
ControllerController
Controller
Key
KeyKey
Key Description
DescriptionDescription
Description
Panic key
Panic key Panic key
Panic key -
--
- Initiates panic alarm options when selected for 4 seconds.
Home key
Home key Home key
Home key -
--
- Used to exit from a screen or return to the home screen
Keypad Lockout
Keypad LockoutKeypad Lockout
Keypad Lockout
In the event that 24 numeric keys (0-9) have been entered within a 15-minute window and a valid
command is not executed, the system stops processing additional numeric key presses for a period
of 15 minutes. Entering any numerical keys during that period will cause the control to emit a single
long beep. CID Code 461 Wrong Code Entry will be entered in the Event Log and transmitted to the
Central Station. When the 15-minute lockout window expires, a Restore message is sent to the
Central Station and entered into the Event Log.