Honeywell Lyric W1 - Device Connection and Pairing; Connect; Pair and name your detector

3
3 Connect
Pair and name your
detector
1 Under Add New Device,
select Lyric Water Leak and
Freeze Detector.
Note: Make sure Bluetooth is
enabled on your mobile device.
2 Provide a location for your
detector. Press NEXT.
3 The detector will now pair
with the app.
Note: If you have more than
one detector, you will need to
connect each one individually.
4 An audible alert will sound
and your detector’s LED will
turn solid blue to indicate it
has been paired. Press NEXT.
5 Create a custom name for the
detector or select one from
the list. Press NEXT.
32325307_A.indd 3 3/7/2017 4:41:30 PM