Honeywell Lyric - Deleting Z-Wave Devices (Exclude); Editing Z-Wave Device Names; Advanced Tools

35
Including Thermostats
Install and test thermostats before Including them in your system. Refer to the device’s
instructions for more information about installation.
See Notes on Thermostats for more information about using thermostats with Lyric™.
Deleting Z-Wave Devices (Exclude)
To delete (Exclude) a Z-Wave® device:
1. On the Z-Wave Device Management menu, press the arrow.
2. Press Tools.
3. Select Exclude Devices.
4. The panel enters Exclusion mode. Next, the panel displays “Ready to Exclude device.
Press the function button on device.”
5. Press the device’s Function button.
6. The device is excluded from the system and its information is displayed.
7. To delete another device, press Exclude on the right side of the screen.
OR
Press  to return to the previous screen(s).
Editing Z-Wave Device Names
1. On the Z-Wave Device Management menu, select the category that includes the
device you want to rename.
2. Select the device in the displayed list.
3. The device’s controls appear, showing the device’s default name.
4. Press Edit on the right side of the screen.
5. A keyboard appears on the touchscreen.
6. Press Clear to delete the default name.
7. Enter a custom name, using as many as 14 characters.
8. Save the device’s new name.
9. When you are finished editing, press  to return to the previous screen(s).
Advanced Tools
1. From the Z-Wave Device Management menu, open Tools.
2. Select Advanced Tools.
3. Enter the Master User code. The Advanced Tools screen appears:
View Enrolled Devices
Press to display Z-Wave device information: System Index/name, Secured or Non-Secured,
device type, device ID, manufacturer, node number.