Honeywell Lyric - System Settings

47
System Settings
Brightness/Volume/Cleaning
Home > Settings
Adjust voice and system sounds with the Volume slider. System sounds include zone alert chimes
and countdown beeps.
Adjust touchscreen brightness with the Brightness slider.
NOTES • As the sliders move, the Controller previews changing volume and brightness levels.
• CHIME must be enabled on the Settings menu to enable voice annunciations.
• Volume settings on this menu do not affect the Voice Command feature.
• Some system event notifications can cancel cleaning mode and return the system to
normal operation.
Press Clean before cleaning the touchscreen. Lyric™ hides the controls and counts down 15
seconds. During this time, a soft, damp cloth can be used on the screen without affecting the
controls. See
Maintenance for more information.
Wi-Fi Configuration
Home > Security > Tools > Wi-Fi Config
Manage your system’s router here. Remember that the Controller and all Wi-Fi® cameras must be
on the same network.
To View or Join Available Wi-Fi Networks
1. On the Tools menu, press the Wi-Fi Config button. A list of Wi-Fi options appears.
2. Press Scan Access Points. A list of available networks is displayed. Use the up and
down arrows to scroll through the list. Press
 to return to the previous screen.
3. Select the desired network and press Edit. The network information is displayed. If a
password is required, press
Key and enter the password.
4. Press Save.
5. Press JOIN.
6. Press  to return to the previous screen.
Manually Configure Access Point
IMPORTANT
The Security setting below must match the security protocol used by your network
router.
1. On the list of Wi-Fi options, press Manual Config AP. The Wi-Fi enrollment menu
appears. (Fields include
Network Type, which cannot be changed.)
2. Press SSID Name.
3. Enter the network’s name.
4. Press Save.
5. Press Security.