page 12 of 24 www.honeywellsafety.com
C11. Inserting in the guiding cable:
Fig. C3
1: Lock knob
2: Slider
3: Latch
1.
Press
the
lock knob
(1).
2.
With
the
lock knob pressed
(2)
push slider
2 into the casing.
3. Through the now-open gap in the casing of the shuttle, place the
shuttle on the cable
such
that
the
arrow
on the
casing points
upward.
4. Release the slider (2) and the lock knob
(1).
5.
The shuttle
for the
Vi-Go
system
is
now connected
to the
guide
cable.
6. Check whether the shuttle can freely slide vertically on the guide
cable.
7. Check the functioning of the locking and catch mechanism by
moving the latch
(3).
Fig. C4
To Next Page
Loading...
