Honeywell MK VIII - Page 45

060-4314-000 • Rev. C - May 2004
MK VI & MK VIII EGPWS Pilot Guide
45
Options
continued
• Steep Approach Discrete – For installations that include
a momentary steep approach input discrete, an associated
steep approach activated lamp output is turned on whenever
steep approach is activated.
• Flap Override – Cockpit switch to select landing flaps when
not in the landing flap configuration.
• Flap Override Discrete – For installations that include a
momentary flap overide input discrete, an associated flap
overide activated lamp output is turned on whenever flap
override is activated.
• AutoPilot Engaged - When connected to an AutoPilot
engaged signal, selects reduced EGPWS Bank Angle alert
threshold.
For additional options information, refer to the appropriate In-
stallation Design Guide (IDG), 060-4314-125 or 060-4314-150 or
contact Honeywell.