Honeywell MN Series User Manual

16EN
TROUBLESHOOTING GUIDE (CONTINUED)
PROBLEM POSSIBLE CAUSE SOLUTION
Heater
*
is not
switching ON.
Heating function not
activated yet.
The ambient temperature
is too high.
Check that the Heating function has been activated.
will be illuminated when the
Heater is switched ON.
Heating is activated
only when the ambient
temperature is below
25°C (77°F).
Switch on the Heating function when the ambient
temperature reaches below 25°C (77°F).
EN
*Applicable for models with Heating feature only.

Honeywell MN Series Specifications

General

Brand	Honeywell
Model	MN Series
Category	Air Conditioner
Language	English