Honeywell MN10CES User Manual

Battery Installation: Remove the cover on the back of the remote control and insert two AAA
batteries with ‘‘+’’ and ‘‘-’’ pointing in the proper direction according to the polarity markings.
• Use only two AAA or IEC R03 1.5V batteries.
• Remove the batteries if the remote control is not in use for a month or longer.
• All batteries should be replaced at the same time, do not mix with old batteries.
• Properly dispose of used batteries.
12
USE & OPERATION
Caution

Honeywell MN10CES Specifications

General

Timer type	Digital
Noise level	50 dB
Variable power	Yes
Number of speeds	3
Airflow (high speed)	294 m³/h
Cooling capacity (max)	1000 BTU/h
Timer duration (maximum)	24 h
Air conditioner functions	Cooling, Dehumidifying, Ventilating
Cooling capacity in watts (nominal)	- W
Cooling energy efficiency (EER, W/W)	-
Hourly energy consumption (cooling)	- kWh
Display type	LED
Product color	Black, Silver

Weight and Dimensions

Depth	385 mm
Width	460 mm
Height	746 mm
Weight	29100 g
Package depth	475 mm
Package height	870 mm
Package weight	33800 g