AM-1000 Programming manual Page 9
AM1000_manu Doc. M-145.2-AM1000-ENG Rev A.1 NOTIFIER ITALIA
Conditions with alarm from a zone in test
Pressing the escape key it is visualized the list of the tested devices of the zone with the indication of the
name of the point, see following plate:
With 56 it is possible to visualize the list of the tested devices of the zone.
Visualisation of the list regarding the excluded devices and zone
To visualize the following plate, from the main screen press the key “F3” and then select the function
“Display” :
To look with 56the list of the excluded devices it is necessary to select the type to be visualized and
confirm it pressing the return cape
.
Hour and date of the event
Alarm from the
test zone
Device in alarm
S = detector
M = module
Programmed test for
the device
Meter of the n° of
excluded devices/zone
To Next Page
Loading...
