Need help?Do you have a question about the Honeywell Notifier SFP-2402 and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | Notifier SFP-2402 |
| Category | Control Panel |
| Language | English |
Lists the main features and specifications of the SFP-2402 and SFP-2404 panels.
Details AC power, battery requirements, and optional modules.
Describes front panel buttons and their functions.
Explains input, output, and relay circuits.
Lists main circuit board, cabinet, transformer, and batteries.
Details optional modules like CAC-4, 4XTM, 4XZM, 4XLM.
Instructions for mounting the backbox to the wall.
Details primary AC power and secondary battery power connections.
Describes the Initiating Device Circuits (IDCs) and their compatibility.
Details Notification Appliance Circuits, power outputs, and relays.
Outlines rules for separating power-limited and nonpower-limited wiring.
Details installation compatibility for various option modules.
Lists programmable features configurable via DIP switches SW1, SW2, SW3.
Explains the functions of SW1 DIP switches for Silence Inhibit, Auto-silence, etc.
Details SW2 DIP switch settings for IDC verification and supervision.
Explains the functions of SW3 DIP switches for NACs and synchronization.
Configures strobe synchronization for various manufacturers.
Explains the functions of panel buttons in normal mode.
Explains how to perform audible and silent walktests of IDCs.
Explains the meaning of various status LEDs on the panel.
Details panel actions upon detecting a fire alarm condition.
Details panel actions upon detecting a trouble condition.
Details how to calculate the required AC branch circuit current.
Explains how to calculate the system's current draw.
Explains how to calculate the required battery size in Ampere Hours (AH).
Details NFPA 72 requirements for standby and alarm battery times.
Lists minimum system components for NFPA compliance.
How to connect FACP dry contacts to transmitters for monitoring.
Instructions for actions when audible devices are sounding (alarm).
Instructions for actions when a trouble condition occurs.
Actions to take during power failure or brownout.
How to silence alarm notification appliances.
Procedure for testing panel LEDs and piezo sounder.
Details the manufacturer's warranty terms and conditions.
Outlines the process for submitting warranty claims.
To Next Page