BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN
14 EN1B-0198GE51 R1004B
Pieces Item
2 3-pole Phoenix controller bus
channel connectors
4 Optional wall mounting clips
4 Small inserts
4 Screws
4 Please read chapter 5 Connections on page 19
carefully prior to connecting any power and
data interface cables to the BNA.
5 Please refer to the installation instruction
manuals of each component that shall be
connected to the BNA, like 95-7545 XLS1000
Installation Instructions, 95-7421 FS90
Installation Instructions, and 95-7551 LAN
Installation Instructions, etc.
WARNING :
Do not remove the cover of a BNA device.
There are no user-serviceable parts inside.
Any unauthorized modification of this equipment
may result in the revocation of the owner's
authority to continue its operation.
To Next Page
Loading...
Need help?
General
