Honeywell Q7055A - Page 17

BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN
EN1B-0198GE51 R1004B 17
device has to be prepared prior to mounting it to a
wall.
Figure 4-3
Put the BNA-adapter with the
top side down on the desk
(Figure 4-3).
Figure 4-4
Remove the four feet (Figure
4-3) from the bottom of the
BNA by pushing them
horizontally away from the
housing with a flat screw-
driver (Figure 4-4).
Figure 4-5
Push the four inserts
(included) fully and hori-
zontally into the housing
(Figure 4-5).