BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN
34 EN1B-0198GE51 R1004B
Command dc defines the IP address of the FTP-
Server, the path to the application firmware, a
username on the FTP-Server and the user’s pass-
word. This command must be invoked prior to
using command load.
Prerequisite for downloading an application
firmware is a running FTP-Server machine some-
where in the network that can be reached by the
BNA device. The FTP-Server machine is responsible
for storing the application firmware image to be
loaded into the BNA device. The application firm-
ware image for the BNA is delivered on the
distribution media of the Building Management
System currently in use.
The description of how to set up and invoke an
FTP-Server on each specific operating system is not
within the scope of this document. Please refer to
the documentation set of the operating system used
on the machine that has been selected for the role of
the FTP-Server.
dc is not a direct command; instead, it provides the
following commands in a sub-shell:
display displays current download configura-
tion.
modify changes download configuration. After
entering this command each download
configuration item will be queried
individually. After having entered all
requested information, it will be asked
whether to take over the new settings.
To Next Page
Loading...
Need help?
General
