16
SCANNER OPERATION
Configurable Button Functions
SECONDARY SCAN PATTERN
B
UTTON HOLD MODE WITH CODEGATE DISABLED
For illustration purposes the unit’s primary scan pattern has been set to
all scan lines (omnidirectional reading) and the secondary pattern has
been set to single-line (menu reading) with a 10 second button click
timeout configured.
1. The primary scan pattern is active when the
scanner starts.
2. To activate the secondary scan pattern,
press and hold the button.
3. To scan and transmit the bar code, align the
laser line over the bar code while continuing
to hold down the button. The scanner will
beep once to indicate the bar code has been
scanned and transmitted.
4. The primary scan pattern will automatically
reactivate after the button is released and no
bar code is present in the scan field.
To Next Page
Loading...
Need help?
General
